NOTE: If you reboot the Raspberry PI at any time, you will need to enter your user name and password in order to log into the system. If you did not select the correct language and keyboard settings during installation, you can set them in the configuration program. Language and keyboard can be selected at the bottom of the screen.Īfter installation, the Raspberry PI will boot up into the Raspbian operating system and automatically run a configuration program that allows you to change some system settings. NOOBS 1.3 allows you to select your language and keyboard after booting from the SD card for the first time and before and during software installation. This setting is now the default in NOOBS 1.3. A setting in a file can be changed to allow the PI and monitor to boot at the same time. In versions of NOOBS prior to 1.3 it is important to power up the monitor first and then apply power to the Raspberry PI to ensures that the PI detects the monitor. NOTE: NOOBS 1.3 should eliminate the problem that previous versions of NOOBS/Raspbian had in that the monitor would not display anything if the PI and monitor were switched on at the same time. The Raspberry PI will boot from the SD card and allow you to install the operating system of your choice – choose Raspbian and install it now. Switch the monitor power on and connect the 5V power supply to the Raspberry PI micro USB connector. Plug the HDMI monitor, keyboard, mouse and SD card into the Raspberry PI board. Copying to SD CardĪfter downloading NOOBS to your hard-drive, extract the contents of the zipped NOOBS file and copy to your SD card. Note that NOOBS is larger than 1GB to download if downloading the offline version. NOOBS version 1.3 is used in this article. The easiest way to install Raspbian is to download the New Out of Box Software (NOOBS) from the Raspberry PI download page. The Raspberry PI only boots from an SD card, so the operating system is installed to an SD card.The Raspberry PI can run a number of different operating systems, but we will install Raspbian in this article.Raspbian is a Debian Linux operating system that has been configured to run on the Raspberry PI. Ethernet cable and Internet for software updates and installation.SD card 4GB or bigger with speed grade of 4 or higher (e.g.5V power supply with micro USB connector and rated at 700mA or more.The following hardware is used in this article: The Ethernet connection allows easy software updates and installation via the Internet. The Raspberry PI model B board with Ethernet, 2 USB ports and 512MB of RAM is used. You will initially need a keyboard, mouse and screen to develop your embedded application. In this article the Raspberry PI is set up as a software development environment that will be needed even if you intend to use your PI as an embedded system without keyboard and mouse and perhaps even without a screen.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |